Can you put a 48 volt battery on a 36 volt e bike? (2024)

Can you put a 48 volt battery on a 36 volt e bike?

Can You Use A 48V Battery On A 36V Bike, And Vice-Versa? But while your e-bike will probably power on and function, you can cause damage to your e-bike by using a battery with higher voltage than the e-bike's motor and/or controller are designed to handle.

Can I put a bigger battery on my ebike?

Yes, a bigger battery can be installed on an electric bike. For example, if an Electric Bike has 25 AH of battery pack and you have a 36AH battery pack then it can be higher than 30% of the original battery capacity without any problem.

What voltage should a 36V ebike battery be?

A typical 36V e-bike needs a battery that delivers power between 30V and 42V. A 36V pack at 42V is 100% charged and holds as much energy as it can; at 30V it should shut down and stop giving power before causing permanent damage.

What is the difference between 36 and 48 volt ebike?

If the e-bike has a 48V battery with a 10Ah capacity, it can deliver a maximum power output of 48V x 10A = 480W. This means that the 36V e-bike has the potential to deliver more power to the motor than the 36V e-bike, resulting in Longer distance .

Can I use a 24V battery on a 36V Ebike?

Using a 24V battery on a 36V ebike can significantly impact the performance of the ebike. The lower voltage of the battery may result in reduced power output, slower acceleration, and overall diminished performance.

What is the best size battery for an electric bike?

The benchmark standard of battery in the electric bike industry is a 10 amp hour battery. With a battery like that, you can go roughly 20 -40 miles on a single charge. You might say to yourself, “20-40 miles, that's a really broad range but why is that such a broad spectrum.”

What happens if I use a 48v 20ah battery instead of the 48v 12ah original battery of my eBike will it damage it?

You will have increased capacity - the battery will have a longer run time assuming that it's used in the same eBike, meaning you can go further on a single charge. It's a great upgrade, a 66% increase in capacity. As long as the voltage of the battery pack is the same, you're fine.

Can I put a 48V battery on a 36V scooter?

An upgrade from 36 Volts to 48 Volts would increase the power and top speed of the scooter significantly however if the original 36 Volt motor was still used then it may run hotter than normal and its lifespan could be lowered depending upon how hot it got while the scooter was being driven.

What happens if you charge a 36V battery with a 48V charger?

The voltage of the charger must be matched to the voltage of the battery system being charged. A 48 volt charger would see your 36 volt battery system as a very under-charged battery (not being 48 volts) and the net effect would be to damage your batteries attempting to bring them up to 48 volts.

What is the low voltage cutoff for 36V ebike battery?

I understand for example a 36v battery, typically controllers will have a low voltage cutoff setting at 30v. I'm assuming this kicks in immediately as soon as 30v is reached even under load, even due to voltage sag.

Will a higher voltage battery make my ebike faster?

Electric bikes typically come with a 48-volt or 52-volt battery. The difference between the two is power and performance: A 52V battery delivers better performance. A higher-voltage battery provides greater efficiency, with the battery using less electricity to provide the same or better power for the bike.

What is the best voltage for e-bike battery?

The higher voltage 52V battery packs fuel considerably more power, more speed and higher efficiency for a more enjoyable ride. The 52V battery system has been used by “hot-rodders” to achieve a higher level of e-bike performance compared to the standard 48V systems.

How long does a 36V ebike battery last?

If properly cared for our Hyper 36V / 7.8 Ah lithium-ion electric bike batteries can last from 3 to 5 years. Always follow our local lithium-Ion battery recycling rules and regulations when disposing of your old E-Bike battery. **** For E-bikes purchased at Sam's Club please call 866-204-9737 for replacement batteries.

Can I run a 36V motor at 48V?

Usually not. 48v batteries charge to 54.6 at 100%, which exceeds your capacitor rating.

Can I run a 36V motor on a 24V battery?

It will run just fine on 24v but it will run about 1/3 slower.

What is the cut off voltage for a 48V ebike battery?

There are thirteen series groups in a 48V battery, and if any of them go under about 3 Volts, the BMS shuts off the battery.. If the groups are all balanced, shutdown happens around 39 volts.

How fast can a 36v electric bike go?

In general, most 36v electric bikes will have a top speed of around 20-25 mph, which is comparable to traditional road bikes. However, some higher-end models with more powerful motors and lightweight frames may be capable of reaching speeds of up to 30 mph or more.

What battery do I need for a 1000W ebike motor?

48V Battery 14AH Lithium Battery Li ion Battery Electric Bike Battery for 200-1000W Motor Electric Bike (48V 14AH Without Charger)

What is the lifespan of an electric bike battery?

You should typically expect a battery to last between 3 and 5 years if it is well maintained. (A lithium-ion battery will slowly lose its capacity over time, even if it's not used.)

Will a 52V battery hurt a 48V controller?

52v batteries have a maximum voltage with a full charge of 58.8v, so this is a safe voltage for the components in a 48v controller. Motors are even more tolerant. They just spin faster, given higher voltages.

Is 52V faster than 48V?

A 52V e-bike battery provides a faster speed to the motor than a 48V. One of the most important differences is related to the range, a 52V e-bike battery offers a range wider than a 48V.

How long will a 36V 10ah battery last?

The typical 500w eBike will use around 12-24wh per mile. A 36v 10ah 360wh battery will give you between 15-30 miles range per charge using 100% of the capacity. The consumption rate depends on many factors such as the amount that you pedal, speed, wind, rolling resistance, weight, hills and how much throttle you use.

Can you convert a 36V to a 48V?

Yes! Here are the main parts that will need to be installed/swapped out to do a 36V to 48V conversion: Upgraded batteries. Upgraded solenoid.

How fast is 1000w 48V in mph?

That is 36.3 miles per hour. So up to that speed, you can hit the throttle and get an assist. It was quite weird when going down a long, steep downhill to hit the throttle and feel the motor provide even more speed.

How fast is 48V 1500W in mph?

26” Electric Mountain Bike for Adults, 1500W brushless geared hub motor 48V 22.4AH Battery, speed reaching up to 30.5Mph,Shimano 7 Speed,3rd gear. The cleverly designed classic frame has a stylish shape and is equipped with an external battery to create an eye-catching appearance.

Popular posts
Latest Posts
Article information

Author: Dong Thiel

Last Updated: 25/06/2024

Views: 6324

Rating: 4.9 / 5 (59 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Dong Thiel

Birthday: 2001-07-14

Address: 2865 Kasha Unions, West Corrinne, AK 05708-1071

Phone: +3512198379449

Job: Design Planner

Hobby: Graffiti, Foreign language learning, Gambling, Metalworking, Rowing, Sculling, Sewing

Introduction: My name is Dong Thiel, I am a brainy, happy, tasty, lively, splendid, talented, cooperative person who loves writing and wants to share my knowledge and understanding with you.