Can I charge a 36V scooter with a 48v charger? (2024)

Can I charge a 36V scooter with a 48v charger?

A: No!!! The voltage of the charger must be matched to the voltage of the battery system being charged. A 48 volt charger would see your 36 volt battery system as a very under-charged battery (not being 48 volts) and the net effect would be to damage your batteries attempting to bring them up to 48 volts.

Can I put a 48V battery on a 36V scooter?

But while your e-bike will probably power on and function, you can cause damage to your e-bike by using a battery with higher voltage than the e-bike's motor and/or controller are designed to handle. That's the case when using a 48V battery on a maximum 36V motor or controller.

Can I charge a 36V battery with a 42V charger?

If you do not have specifications for your battery charger limitation, it is recommended to choose a charger that its maximum output current is 1/3 or less of battery maximum Ah capacity. For example, for a 36V 9 Ah lithium ion battery, it is recommend to choose a 42V charger with maximum output current 3 Amps or less.

What can I use to charge a 36 volt battery?

For 36 volt lithium batteries

We highly recommend you use a LiFePO4 compatible charger. 36v chargers for lead acid batteries may work, but will decrease performance and lifespan of the battery.

Can I use 54V charger for 36V battery?

The majority of eBikes fall between the 36v - 48v range. Here is an example of pairing the right battery voltage with the right charger voltage: A 36V bike should have a charger that goes up to 42V. A 48V bike should have a charger that goes up to 54V.

What happens if you charge a 36V battery with a 48V charger?

The voltage of the charger must be matched to the voltage of the battery system being charged. A 48 volt charger would see your 36 volt battery system as a very under-charged battery (not being 48 volts) and the net effect would be to damage your batteries attempting to bring them up to 48 volts.

Will 48V battery work with 36V motor?

Most 36V controllers will support a 48V pack, but the LVC will still be set for a 36V pack, so you'll need to monitor pack voltage and not let it get too low. You can verify this by opening the controller and checking the caps and fets. If it has 63V main caps it should be fine.

Can I charge a 36v battery with a 12v charger?

Originally Answered: Can you charge a 36v battery with a 12v charger? Yes you can if the 36v pack can be broken up into 3x 12v battery's , charged separately or in parallel then when full connect back in series. You have just charged a 36v battery with a 12v charger.

What voltage should a 36v battery be charged at?

A 36 volt battery is a 10 cell battery. That means at full charge, you should be at 42 volts.

How do you charge a 36v lithium battery without a charger?

Can I charge a 36V battery with a 20v charger?

In this case, you should use a charger specifically designed for 36-volt batteries to ensure safe and efficient charging. Using the wrong charger voltage can potentially lead to overheating, overcharging, or other issues that could be harmful to both the battery and any connected equipment.

Can I charge 60V battery with 48V charger?

Voltage Output: The charger should match the voltage rating of your battery system, whether it is 48V, 60V, or 72V. Using a charger with the incorrect voltage output can damage the batteries or lead to undercharging.

What happens if I use a 48V 20ah battery instead of the 48V 12ah original battery of my eBike will it damage it?

You will have increased capacity - the battery will have a longer run time assuming that it's used in the same eBike, meaning you can go further on a single charge. It's a great upgrade, a 66% increase in capacity. As long as the voltage of the battery pack is the same, you're fine.

What is the difference between a 36V and 48V ebike battery?

It is pretty simple to understand. A 36V e-bike battery will allow you to draw a lesser critical current, typically around 15 amperes whereas, a 48V e-bike battery will allow more current in the range of 10 – 40 amperes. It means you can go faster with a 48V E-bike battery.

Can I charge a 48V battery with a 48V charger?

Most battery manufacturers recommend sizing the charger at about 25% of the battery capacity (ah = amp hour capacity). Thus, a 100 ah 48 volt battery pack would take about a 25 amp 48 volt charger (or less). Larger chargers may be used to decrease charge time, but may decrease battery life.

Can I use a 24V battery on a 36V ebike?

A 36V motor should operate just fine on a 24V battery. It won't be quite as fast as it would with a 36V battery, but you'll also be much less likely to burn out the motor.

What's the difference between 36V and 48V?

Even though they have a lower voltage, the amperage is actually higher than the 48V. This means the 36V uses more electricity for less motor horsepower and less range. Lower top speed. They are a lot slower and less powerful than the 48V.

What is the lowest voltage on a 36V battery?

A typical 36V e-bike needs a battery that delivers power between 30V and 42V. A 36V pack at 42V is 100% charged and holds as much energy as it can; at 30V it should shut down and stop giving power before causing permanent damage.

What is a fully charged 36V battery?

For example: a 36v battery pack will read 38.2v fully charged. Maximum drop under load should not be more than 6v below 38.2v equal to 32 volts or less.

Is 48V faster than 36V?

Basically, a 48V system gives you more “pep in your step” and picks up/speeds up a bit faster than a 36V system. Energy Needed/Amps Drawn- A 48V system draws less amps and provides a little more range with all things being equal (cart/passenger payload weight, motor horsepower, etc).

How fast can a 36V electric bike go?

In general, most 36v electric bikes will have a top speed of around 20-25 mph, which is comparable to traditional road bikes. However, some higher-end models with more powerful motors and lightweight frames may be capable of reaching speeds of up to 30 mph or more.

Can you run a 36V motor on 12V?

If you are talking DC motor then putting 12V into a 36V motor just makes it go slow with less torque. No harm done, unless having less torque means that the motor sits there stalled because it hasn't enough power to turn it's load yet there may be enough current flowing to overheat one armature winding.

Can you charge 36V battery?

Cons: You'll need a special charger for a 36V lithium battery. 12V chargers are more common on the market, but they won't cut it.

Can a solar panel charge a 36V battery?

A 36V 100W solar panel perpendicular to the sun could produce ~2.8A for 8 hrs in the summer providing about 22.4Ah of charging for a 36V battery charging to 43.8V. In the winter time about half of the daylight is available at 1.4Ah.

Can you put a 36V battery on a 24v motor?

Applying a voltage higher than the motor's rated voltage can result in several issues: Overheating: The increased voltage can lead to higher currents flowing through the motor windings, causing the motor to overheat.